Coolant Pipe Helping Hands
Here’s my Helping Hands project I designed in Fusion 360:
The coolant pipes use 1/4 BSP thread and screw directly into the object. If you take off the nozzles from the pipes the crocodile clips happen to perfectly fit too.
Coolant Pipes:
https://www.amazon.co.uk/gp/product/B008O14864/
Crocodile Clips:
https://www.amazon.co.uk/gp/product/B008IEFHRQ/
STL on Thingiverse:
https://www.thingiverse.com/thing:1876684
The clamps used are from Wilko. 75p each.
I’ve also created an Instructables guide here.
Previous Post
Next Post